1–This bulk-size container is just the right size and has a nice wide-mouthed opening.
2–I used a hole-saw drill bit to make a opening in the bottom of the container. (even with the hole saw, this wasn’t easy…it was surprising thick!)
3–Next, measure equal thirds around the top opening and drill holes with a regular drill bit to attach a hanger.
4–This step is probably optional, but folks around my ‘burb wouldn’t appreciate trash hanging from my home, so I spray painted it to make it look nicer. (It might be functional too, as I don’t think direct sunlight would be good for the plant’s roots.)
UPDATE: This puzzling picture is not trick photography, just a bad crop job! The container is mounted on a stake in the ground to facilitate the painting. (Thanks, Wayne!)
5–Then, I attached an old chain hanger to the three holes in the rim; you could use wire, sturdy twine, even some old coat hangers if that’s what you have.
I don’t think we need yet another “how to” on how to get the plant in there; let’s just say that getting the plant through that hole reminded me of childbirth! Tip: wrap the foliage in a snug tube of newspaper to help work it through the bottom with a minimum of effort and damage. Or, just buy a smaller plant, which is what I wish I’d done!
The finished product: NOT seen on TV, but available for no easy payments of $0.